European Factory
Free Shipping to the EU
200+ Partners in Europe
Help Center

Search our knowledge base or browse our topics below

Assemble Video


Step 1 Before opening the box

Record the exclusive bike information on the side of the box with your phone. Make sure it is with the correct direction and without serious damage

Step 2 Unpack the E-bike

Open the package and take out all of the parts. Be careful not missing even a little piece of part.

The parts shall include:

Front WheelE-bike Frame
ToolkitsCharger
Keys (2 identical)Headlight
Quick ReleasePedals
DisplayManual


Step 3 Unfold the kickstand to make the E-bike stand up

Step 4 Install the handlebar

Install the handlebar to the stem and fix it with matching screws by a 4# hexagon wrench. During installation, adjust the handlebar to an appropriate angle so that the electric bicycle can be operated comfortably. Make sure the four screws are tightened enough and the handlebar cannot be moved.

Step 5 Install the front wheel

5.1 Place the front wheel in the correct position of the fork groove and tighten it with matching wheel axel. (if there are any hub protection parts attached to the wheel, remove them)

5.2 Make sure the front wheel will not rub the brake pads when it is rotating under the condition of not pinching brake handle.

Step 6 Install the front fender and headlight

6.1 Install the front fender and headlight on the front fork with matching screws and nuts by a 4# hexagon wrench. Make sure the front fender and headlight support cannot be moved.

6.2 Adjust the headlight to a proper angle by this way: loosen the adjusting bolt with a cross-head screwdriver, adjust the headlight tilt angle to the best position, and then tighten the bolt.

6.3 Connect the cable plug to the headlight, please note to align the inner pins and notches with the outer arrows.

Step 7 Adjust the saddle height

Move the saddle up or down to your desired saddle height. Do not raise the saddle post exceeding the minimum insertion mark on the saddle post. Close the quick release lever and make sure the lever is tighten enough when locking the saddle post.

Step 8 Adjust the saddle angle or position

Release the screw with a 6# hexagon wrench and then you can move the saddle back and forth to adjust the position. Also you can adjust the angle of the saddle at the same time to make it more comfortable while riding.

Step 9 Install the pedals

The “L” mark refers to the left pedal.

The “R” mark refers to the right pedal.

Tighten the right pedal clockwise and tighten the left pedal anticlockwise with the 15# wrench.

Note: Please carefully thread each pedal into it’s appropriate crankset.

Step 10 Inflate the tyres

Check whether the tyres beads and tyres are evenly seated on the rims. Use a pump with a Schrader valve and pressure gauge to the recommended pressure indicated on the tyre sidewall.

Note: Do not over inflate or under inflate tyres.

NOTICE: Both wheels must be properly settled before operating your bike. If you are not able to assembly your bike, please contact us or look for help from a certified, reputable local bike mechanic.Ensure all hardware is tightened properly.

Minors are prohibited from riding.

Related Blog
E-bike As An Aid in Recovery After COVID-19 E-Bike Tech
20 2023-03
E-bike As An Aid in Recovery After COVID-19
People with a history of COVID-19 may feel tired quickly during even a small effort. This is often related to cardiovascular problems that occur in a large number of convalescents, otherwise known as post-covid cardiac syndrome. Symptoms of this type may not allow you to use a conventional bicycle. However, riding an electric bike can be recommended due to the fact that it allows you to adjust the intensity of physical effort to the individual preferences and capabilities of the cyclist.
BIKE EXPO 2023 Memory Jobobike News
20 2023-03
BIKE EXPO 2023 Memory
This year's participation of the JOBOBIKE team in the BIKE EXPO at the PGE National Stadium in Warsaw was not the first. Once again, we were able to present electric bikes of the highest quality, created with passion, knowledge and commitment.
JOBOBIKE × BAFANG Jobobike News
20 2023-03
JOBOBIKE × BAFANG
JOBOBIKE is looking forward to close cooperation with BAFANG. BAFANG has been innovating and developing to create outstanding product quality for almost 20 years. Now BAFANG will work together with JOBOBIKE to fully explore the infinite possibilities of e-bikes.
JOBOBIKE E-bikes With Certificate Jobobike News
20 2023-05
JOBOBIKE E-bikes With Certificate
Jobo Europe cares about the highest standards so that our customers can be sure that they choose a product of the highest quality, the use of which will be safe. That's why we made sure that our e-bikes are properly tested and certified by TÜV, CE and RoHS.
Winter holidays in the era of inflation. How to spend them actively and not spend all your savings? E-Bike Tech
21 2023-03
Winter holidays in the era of inflation. How to spend them actively and not spend all your savings?
Winter holidays for the inhabitants of some provinces have already ended, but most of us are still waiting for free days, planning them so as to make the best use of time. Unfortunately, in the era of constantly rising prices, not everyone can afford long trips or popular winter sports, such as skiing or snowboarding. If you are looking for a new way to spend your free time pleasantly in winter, this article is just for you!

Still can't find what you're looking for?

Our award-winning customer care team is here for you

Enquiry
TOP